Toho-electronics TTM000 Manuel d'utilisateur télécharger pdf (Page 18)

5.2 Setting a data length

5.3 Setting a stop bit length

5.4 Setting a parity

5.5 Setting a BCC check

The BCC check is disabled.

Initial value of MODBUS (RTU): Initial value of MODBUS (ASCII):

＊＊＊

Stop bit 1

Stop bit 2

No parity

Odd parity

Even parity

Data length, 7 bits

Data length, 8 bits

* The RTU mode settings come only in three types:

、、

The ASCII mode settings come only in three types:

、、

5.6 Setting a communications speed

While in the "Set a communications speed" screen on the preceding page, operate the ▲ and ▼ keys

to make the settings. The initial value is .

＊＊＊＊

1200 BPS

2400 BPS

4800 BPS

9600 BPS

19200 BPS

5.7 Setting an address

While in the "Set a communications address" screen on the preceding page, operate the ▲ and ▼

keys to make the settings. The initial value is .

Setting range: 1 to 247 stations (It cannot be set to a 0.)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 41 42

Pas de commentaire

Toho-electronics TTM000 Manuel d'utilisateur Page 18