48-7009-E 5-73
5.6.2 SET 23 bank automatic switching function setting mode setting screen
■ The bank automatic switching function setting screen is shown below:
Hold MODE key pressed for 2 seconds
Hold MODE key pressed for 2 seconds
Bank automatic switching run OFF (initial value)
Bank automatic switching run ON
* Condition for non-display
• When SET 04 bANKH 0
PV value (present value)
SV value (setting value)
Press the key or key several times.
Setting the bank automatic
switching function setting mode
Bank automatic switching
function selection
Bank automatic switching
source setting
* Condition for non-display
• When bAF = 0 (OFF)
• When SET 04 bANKH 0
Setting range: PM* = SLL to SLH (initial value: 1200)
(*=1 to 7)
* Zone threshold 1-to-7 setting
* Condition for non-display
- When bAF = 0 (OFF)
- When SET 04 bANKH 0
Displayed PM* varies depending on
the bANKH value.
Zone threshold switching
sensitivity range setting
During temperature input (initial value = 2)
Setting range: 0 to 999 or (0.0 to 999.9) C
During analog input
Setting range: 0 to 9999 digit
* Condition for non-display
• When bAF = 0 (OFF) and BAS = 0
• When BAS = 1 and SET 02 LR = 0
• When SET 04 bANKH 0
Commentaires sur ces manuels